EZI HYDROPEL GROUT
Ezi Hydropel Grout is a high performance, single-component improved coloured grout with special attributes of water repellent, reduced water absorption, minimize staining & high abrasion resistance. It is designed to fill joints 2 – 4mm wide between Ceramic Tiles, Porcelain Tiles, Homogeneous Tiles, Ceramic or Glass Mosaics; as well as Natural & Artificial Stone Slabs to internal wall & floor areas at wet or dry areas.
EZI HYDROPEL GROUT
water repellent and minimize staining
Usages
Suitable to use for grouting or pointing joints between ceramic tiles, natural stones, and mosaic tiles.
- grouting or pointing joints between ceramic tiles, natural stones, and mosaic tiles
- grouting or pointing joints up to 5 mm.
- internal and external, wall and door, dry and wet areas including water immersion areas
Key Performance
Water Repellent
Enhance Edge Bonding
Good Compressive
Abrasion Resistance
Good Flexibility
Good Durability
High Flexibility
Aestbetic Appearance
User Friendly
Good Workability
High Shrinkage Resistance
Minimised Efflorescence
Product Information
Application Area
Wall, Floor, Interior, Exterior, Dry, Wet
Mixing Ratio
Approximate 1 pbw Latex Admixture to 2.5 pbw. Grout Fine
Plot Life
Approximate 45 minutes
Setting Life
Approximate 24-48 hours
Step 1 - Preparing the joint
- Allow the adhesive bed to set at least 24 hours before commencing grouting.
- Joints must be dry, flat and free from contamination, e.g dust, grease, laitance, oil, paint, etc.
Step 2 - Preparing the mix
- Mix cementitious grout with water or latex admixture until uniform colour and thin creamy paste is achieved (in accordance to recommended mixture ratio).
Step 3 - Spreading the mix
- Apply grout with rubber squeegee or float, working the grout back and forth to ensure that joints are fully filled and compacted
Step 4 - Finishing the grout
- Clean and remove surplus grout with a clean damp cloth or sponge before it dies out.
- Allow grout to set for 24 to 48 hours before subjected to service condition.
Grout Calculator
A. Tile Length
B. Tile Width
C. Tile Thickness
D. Joint Width
Grout Coverage Calculator
Estimated Consumption:
0.00 kg/m²
Total Required:
-
Recommended Packaging:
-
Highly Recommended - EZI HYDROPEL GROUT
mix with EziMix STAR GT-1 to achieve optimum performance for installation of low water absorption tiles (≤5%) in very demanding situation (e.g. swimming pools, bathrooms, etc)