EZI WP SLURRY C377

EziWP SLURRY C377 is a elastomeric, two-component waterproofing slurry with excellent water resistance, strong adhesion, and durable protection for concrete and wet areas.

EZI WP SLURRY C377

Concrete

Usages

Specially designed for waterproofing under tiles or render/screed in:

  • Toilet
  • Bathroom
  • Swimming Pools
  • Wet Kitchen
  • Laundry & Drying Yard
  • Refuse Chamber
  • Balconies
  • RC Gutter

Key Features

  • SemiFlexible
  • Execellent bonding to well prepared & sound substrate
  • Eco-Friendly – Low VOC & Non-Toxic
  • Pre-packed compenents – Avoid mixing error
  • Slurry consistency – Ease of application
  • Protect against water penetration
  • Protect against concrete carbonation
  • Non-corrosive

Product Information

Application Area

Wall, Floor, Interior, Exterior, Dry, Wet

Mixing Ratio

Part A 25KG Powder to Part B 18KGLiquid

Coverage

2 Coats: Approx. 1.5 – 2.0kg / m²
3 Coats: Approx. 2.0 – 2.5kg / m²

Final Coating Thickness

2 Coats: Approx. 1.5 – 2.0mm
3 Coats: Approx. 2.0 – 2.5mm

Waiting Between Coat

Approx. 2 – 3 hours

Step 1 - Preparing the substrate

  • Ensure the substrate is dry, sound and free from contamination, e.g dust, grease, laitance, oil, loose particle, etc.

Step 2 - Preparing the mix

  • Mix EZI WP SLURRY C077 PART A AND PART B until a consistent slurry is achieved. (in accordance to recommended mixture ratio).

Step 3 - Applying the mix - First Coat

  • Apply EZI WP SLUPPRY C077 consistently onto the substrate using stiff brush, large format brush/roller.
  • Treat all the joints and corners first before apply extended throughout the entire areas.
  • Apply first coat throughout the selected area and allow it to cure until touch-dry condition before second coat commence.

Step 4 - Applying the Mix - Second Coat snf Finishing

  • Before first coat is fully cured, apply second coat over the first coat at opposite direction to provide a strong mechanism waterproofing layer.
  • Allow the applied waterproofing layer to cure for at least 24-48 hours.
  • The ideal thickness for cured layer(2 coats) is approximately 1-2mm.

Downloads

Technical Data Sheet (TDS)
Safety Data Sheet (SDS)