EZI HYDROPEL GROUT

Ezi Hydropel Grout is a high performance, single-component improved coloured grout with special attributes of water repellent, reduced water absorption, minimize staining & high abrasion resistance. It is designed to fill joints 2 – 4mm wide between Ceramic Tiles, Porcelain Tiles, Homogeneous Tiles, Ceramic or Glass Mosaics; as well as Natural & Artificial Stone Slabs to internal wall & floor areas at wet or dry areas.

Product Information

Classification

CG 2 WA

Packing

Shelf Life

6 Months

Application Data

Application Area

Wall, Floor, Interior, Exterior, Dry, Wet

Mixing Ratio

Approximate 1 pbw Latex Admixture to 2.5 pbw. Grout Fine

Pot Life

Approximate 45 minutes

Setting Time

Approximate 24-48 hours

Colour

369
White

370
Ivory

371
Lemon

372
Light Grey

373
Dark Grey

Consumption Table
Size of tile (mm) Width of the joint (mm)
2 3 4
20 × 20 × 4 1.36 2.04 2.72
50 × 50 × 5 0.34 0.51 0.68
100 × 100 × 7 0.24 0.36 0.48
150 × 150 × 8 0.18 0.27 0.36
300 × 300 × 8 0.05 0.08 0.11
300 × 600 × 9 0.09 0.14 0.17
400 × 400 × 9 0.08 0.11 0.15
600 × 600 × 10 0.06 0.09 0.11
800 × 800 × 10 0.04 0.06 0.09

Coverage Calculation Formula

(A + B) × C × D × 1.7 (A × B)
= kg/m²

*Unit = mm

Estimated Consumption: 0.00 kg/m²

Installation Guide

Step 1 - Preparing the joint

  • Allow the adhesive bed to set at least 24 hours before commencing grouting.
  • Joints must be dry, flat and free from contamination, e.g dust, grease, laitance, oil, paint, etc.

Step 2 - Preparing the mix

  • Mix cementitious grout with water or latex admixture until uniform colour and thin creamy paste is achieved (in accordance to recommended mixture ratio).

Step 3 - Spreading the mix

  • Apply grout with rubber squeegee or float, working the grout back and forth to ensure that joints are fully filled and compacted

Step 4 - Finishing the grout

  • Clean and remove surplus grout with a clean damp cloth or sponge before it dies out.
  • Allow grout to set for 24 to 48 hours before subjected to service condition.

Downloads

Technical Data Sheet (TDS)
Safety Data Sheet (SDS)